Product Description

 

Shaft Coupling with Cross-Shaped Slider (SL)
 

Product Description

 

SL cross-type Oldham coupling also known as metal slider coupling, 2 end surface is provided with middle slider radial grooves and half couplings are respectively supplied with tenon which was perpendicular to the middle slider at both ends of the tenon are respectively inserted, then coupling groove 2.5, forming a moving pair, if the amount of axial misalignment or deflection, motion of the slider in the groove of the slide, so to add lubricating oil working face groove and the slider, if the 2 are not concentric, when the speed is high, due to the eccentric slider will produce large centrifugal force and wear, and to bring the shaft and the loading of Jose this only applies to low speed and large load transfer.
 

Product Parameters

Model	Tn(N·M)	[n]r/min	d	D	D1	L	H	S	(kg.m 2 )	(kg)
SL70	120	250	15~18	70	32	42	14	0.5	0.002	1.5
SL90	250	250	20~30	90	45	52	14		0.008	2.6
SL100	500	250	36~40	100	60	70	19		0.026	5.5
SL130	800	250	45~50	130	80	90	19		0.07	10
SL150	1250	250	55~60	150	95	112	19		0.14	15.5
SL170	2000	250	65~70	170	105	125	24		0.25	22.4
SL190	3200	250	75~80	190	110	140	29		0.5	31.5
SL210	5000	250	85~90	210	130	160	33	1.0	0.9	45
SL240	8000	250	95~100	240	140	180	33		1.6	59.5
SL260	9000	250	100~110	260	160	190	33		2	76
SL280	10000	100	110~120	280	170	200	33		3	94.3
SL300	13000	100	120~130	300	180	210	43		4.3	111
SL320	16000	100	130~140	320	190	220	43		5.7	129
SL340	20000	100	150	340	210	250	48		8.4	162
SL360	32500	100	160	360	240	280	48		19.2	258
SL400	38700	80	170	400	260	300	48		26.1	305
SL460	63000	70	200	460	300	350	58		62.9	560

 

Detailed Photos

Company Profile

HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.

Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.

Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective.

 

After Sales Service

1. Design Services
Our design team has experience in the Cardan shafts relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2. Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4. Research & Development
We usually research the new needs of the market and develop new models when there are new cars in the market.

5. Quality Control
Every step should be a special test by Professional Staff according to the standard of ISO9001 and TS16949.
 

FAQ

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artwork in PDF or AI format.

Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have an excellent price principle, when you make the bulk order then the cost of the sample will be deducted.

Q 5: How extended is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 6: What is the MOQ?
A: Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T

♦Contact Us
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

View More

What are the Potential Limitations or Drawbacks of Using an Oldham Coupling?

While Oldham couplings offer numerous advantages, they also have some limitations and drawbacks that should be considered when selecting a coupling for a specific application:

1. Limited Misalignment Capacity: Oldham couplings can only accommodate small amounts of angular and axial misalignment between the shafts. They are not suitable for applications with high levels of misalignment as excessive misalignment can lead to premature wear and failure of the center disc.

2. Speed Limitations: Oldham couplings are generally not recommended for high-speed applications. The flexible center disc has a maximum speed limit, and exceeding this limit can cause the disc to fatigue and fail over time.

3. Temperature Sensitivity: The performance of Oldham couplings can be affected by temperature fluctuations. Extreme temperatures can impact the flexibility and integrity of the center disc material, leading to reduced coupling performance.

4. Backlash in High-Precision Systems: While Oldham couplings minimize backlash compared to some other couplings, they may still have some inherent clearance between the hubs and the center disc, leading to a slight amount of backlash. In ultra-high-precision systems, this slight backlash may be a concern.

5. Material Compatibility: The material used for the center disc must be chosen carefully to ensure compatibility with the specific application’s environment and the media being conveyed. Some aggressive chemicals or harsh environments may degrade the material over time.

6. Maintenance: Oldham couplings require periodic inspection and maintenance to ensure proper functioning. The center disc may wear out over time and need replacement, especially in applications with high torque or frequent start-stop cycles.

Despite these limitations, Oldham couplings remain a popular choice in many applications due to their vibration reduction, backlash minimization, and moderate misalignment compensation capabilities. However, it is essential to carefully assess the specific requirements of the application and consider the potential drawbacks before selecting an Oldham coupling.

Differences Between Oldham Couplings and Other Types of Flexible Couplings

Oldham couplings are a type of flexible coupling used in mechanical systems to transmit torque between two shafts. Here are some key differences between Oldham couplings and other types of flexible couplings:

• Mechanism of Torque Transmission: Oldham couplings use a sliding motion between the center disc and the hubs to transmit torque. The center disc has slots that engage with pins on the hubs, allowing for torque transmission while accommodating misalignment. In contrast, other flexible couplings, such as jaw couplings or beam couplings, typically use elastic materials or flexible elements like rubber or springs to transmit torque.
• Misalignment Compensation: Oldham couplings are specifically designed to handle angular misalignment between shafts. They can accommodate parallel misalignment to a limited extent but are not well-suited for axial misalignment. Other flexible couplings like beam couplings or bellows couplings may offer more comprehensive misalignment compensation, including axial misalignment.
• Backlash: Oldham couplings have a small amount of backlash due to the clearance between the center disc and the hubs. This backlash can be beneficial in some applications to reduce shock loads and vibrations. However, other flexible couplings like beam couplings or jaw couplings may have minimal or zero backlash.
• Construction and Materials: Oldham couplings are typically made of materials like aluminum for the hubs and center disc, and acetal or other plastics for the center disc’s sliding parts. Other flexible couplings come in various materials, including aluminum, stainless steel, elastomers, and composite materials, depending on the application’s requirements.
• Operating Speed: Oldham couplings are suitable for moderate to high rotational speeds, but their speed limitations depend on the material and design. Some other flexible couplings, such as bellows couplings, can handle even higher speeds due to their construction.
• Applications: Oldham couplings are commonly used in applications that require moderate torque transmission and angular misalignment compensation, such as pumps, packaging machines, and automation equipment. Other flexible couplings are used in a wide range of applications, including motion control systems, robotics, aerospace, and automotive industries, where specific coupling characteristics are needed.

Choosing the right flexible coupling depends on the specific requirements of the application, including torque, misalignment, speed, space constraints, and environmental conditions. Engineers and designers should carefully consider these factors to select the most appropriate coupling for their mechanical system.

What is an Oldham Coupling and How Does It Function in Mechanical Systems?

An Oldham coupling is a type of flexible coupling used in mechanical systems to transmit torque between two shafts that are misaligned. It consists of three main components: two hubs or discs and a middle block. The two hubs are connected to the respective shafts, and the middle block sits in between them.

The key feature of the Oldham coupling is the middle block, which has slots on its opposite faces and is connected to the hubs using pins or keys. The slots in the middle block are oriented perpendicular to each other, allowing the middle block to move in a plane perpendicular to the axis of the shafts.

When torque is applied to one shaft, it is transmitted to the middle block of the coupling. Due to the slots, the middle block can slide laterally as the shafts rotate, accommodating both angular and axial misalignments between the shafts. This sliding action helps to reduce the reaction forces and wear that would otherwise occur in rigid couplings when misalignment is present.

Oldham couplings are known for their ability to provide constant velocity transmission even when misalignment exists. They do not have any backlash, which means there is minimal play between the coupling components during rotation. This feature makes them suitable for precision applications where accurate torque transmission and positioning are required.

One of the main advantages of the Oldham coupling is that it effectively isolates the connected shafts from each other, which can help in reducing vibrations and noise. Additionally, it can compensate for parallel misalignment between the shafts, making it ideal for applications where parallel shafts need to be connected while allowing some degree of misalignment.

Oldham couplings are commonly used in various industrial machinery and automation systems, including CNC machines, robotics, printing presses, and conveyor systems. They are particularly useful in applications where precise torque transmission, misalignment compensation, and low maintenance are essential.

editor by CX 2024-03-01